CAMT Y27 Single Movement Hydraulic Press For Sale | Reliable Power for Precision Metal Forming

Featuring a high-strength welded C-frame structure and Bosch Rexroth hydraulic system, the Y27 Single Column Press delivers 270° open access and ±0.5 MPa precise pressure control—ideal for stamping, pressing, and precision forming of large or irregular workpieces with outstanding rigidity, efficiency, and operational flexibility.

When you need accurate, repeatable force on large or irregular parts without the bulk of a traditional four-column press, the Y27 series delivers. Its single-column C-frame design gives operators a full 270° of unobstructed access, while the adjustable worktable (motorized lift optional) makes loading heavy or awkward workpieces faster and safer.

The frame is fabricated from high-strength steel plate, optimized by finite-element analysis and stress-relieved through vibration aging. This construction holds vertical accuracy of 0.02 mm/m even under full tonnage, giving you the rigidity required for precision work in a compact footprint.

Hydraulic models (25–330 tons) use two-way cartridge valves paired with genuine Bosch Rexroth pumps from Germany. Pressure is steplessly adjustable to ±0.5 MPa accuracy, with three controlled speed stages that balance rapid approach, precise working feed, and fast return. Servo-mechanical versions (up to 60 tons) are driven by Yaskawa servo motors and precision ball screws, delivering positioning repeatability of ±0.005 mm while typically cutting energy use 30–50 % and keeping noise under 75 dB.

Whether blanking and drawing sheet metal, pressing bearings and gears to interference fits, bending, riveting, or running material tests, the Y27 provides controlled force, easy access, and long-term stability. It is especially suited to job shops and production lines that handle frequent tool changes or mixed large and irregular workpieces, and meets ISO 12100 safety standards with multi-layer overload protection.

Y27 Single Movement Hydraulic Press Machine Specification

Item	Unit	Y27K-25T	Y27KK-40T	Y27K-45T	Y27K-63T	Y27K-80T	Y27K-100T	Y27K-125T	Y27K-160T	Y27K-200T	Y27K-250T	Y27K-315T	Y27K-330T
Nominal Force	kN	250	400	450	630	800	1000	1250	1600	2000	2500	3150	3300
Stroke Adjustment	mm	10-140	10-140	10-140	10-150	10-150	10-180	10-180	10-180	10-180	10-250	10-250	10-250
Max. Slider Stroke	mm	150	150	150	150	150	200	200	200	200	250	250	250
Max. Opening Height	mm	350	360	320	360	420	450	450	450	450	600	620	620
Throat Depth	mm	230	230	230	230	300	380	380	400	430	450	450	450
Die Loading Height	mm	210-240	210-260	210-270	180-260	180-260	230-340	230-340	220-430	220-430	380-580	380-600	380-600
Strokes per Minute	spm	10-40	10-40	10-40	10-40	10-40	10-40	10-40	20-40	20-40	10-30	10-30	10-30
Max. Pressure	MPa	25	25	25	25	25	25	25	25	25	25	25	25
Rapid Down Speed	mm/s	110	110	110	120	120	120	120	110	110	110	100	200
Working Speed	mm/s	6	6	6	6	6	6	6	6	6	8	8	8
Return Speed	mm/s	80	80	80	80	80	80	80	90	90	90	90	90
Table Size (L-R)	mm	690	760	810	760	1000	1080	1080	1080	1080	1200	1300	1300
Table Size (F-B)	mm	410	460	460	460	600	600	600	720	800	900	900	900
Blanking Hole	mm	100	120	150	120	180	180	180	180	200	200	200	200
Table Height above Floor	mm	680	820	820	840	860	820	820	900	900	960	960	960
Motor Power	kW	5.5	5.5	5.5	7.5	7.5	7.5	11	18.5	22	22	30	30
Oil Pump	ml/r	25YCY	25YCY	25YCY	25	25	25	40	63YCY	63YCY4-B	80YCY4-B	100YCY4-B	100YCY4-B

Looking for more detailed specifications or a configuration that better matches your production needs? Contact our team to discuss additional parameters, customization options, or to receive a tailored quotation. We’re ready to help you find the right Hydraulic Press Machine solution.

Key Advantages of CAMT Y27 Single Movement Hydraulic Press Machine

270° Open Working Access

The open C-frame design gives operators full 270° access. Large or irregular workpieces can be loaded, positioned and unloaded from multiple angles, reducing setup and changeover time.

0.02 mm/m Vertical Accuracy Under Full Load

High-strength welded frame, FEA-optimized and vibration-aged, maintains 0.02 mm/m vertical accuracy even at maximum tonnage—critical for consistent press-fit and forming results.

Bosch Rexroth Precision Hydraulic Control

Two-way cartridge valves paired with genuine Bosch Rexroth pumps deliver stepless pressure control within ±0.5 MPa and three-stage speed switching (rapid approach, controlled working feed, fast return), protecting tools while maximizing cycle efficiency.

Optional Servo Drive with ±0.005 mm Repeatability

Servo-mechanical models use Yaskawa motors and precision ball screws to achieve ±0.005 mm positioning repeatability, cutting energy consumption by 30–50% and keeping noise under 75 dB.

Adjustable Table & Flexible Die Height

The worktable height is adjustable (motorized option available) with a wide die-loading range, allowing quick adaptation to different tools and part sizes without major reconfiguration.

Multi-layer Overload Protection & Extended Service Interval

Sensitive overload protection meets ISO 12100 requirements. Hydraulic oil change interval extends up to 2000 hours, lowering maintenance costs and supporting reliable long-term operation.

CAMT Powerful Press Solution

The Y32 four-column hydraulic press is built for the demands of real production floors. A rigid closed frame of four high-strength columns supports the machine while a hydraulic power unit drives the sliding ram in a smooth, controlled vertical stroke. This delivers clean, repeatable force for stamping, deep drawing, bending, forming, and pressing of both metals and non-metallic materials.

Because the four-column design keeps the ram guided and parallel even under heavy or off-center loads, you get consistent part quality at high tonnages without constant adjustments. Whether you are running high-volume automotive components or precision powder-metallurgy parts, the Y32 provides the stability and force control that high-precision industrial work requires.

Functional Configuration of Hydraulic Press

Typically includes the following core components

The Y32 is engineered with a computer-optimized three-beam, four-column structure that keeps the machine simple to operate, economical to run, and practical for daily production. The hydraulic system uses an insert-type compact valve block that reduces the number of pipe connections and potential leak points. This design delivers reliable performance with minimal hydraulic shock and a long service life under continuous industrial loads.

An independent electrical control system runs the machine directly and remains easy to maintain. Operators work from a centralized button panel that offers two practical modes: two-hand operation for maximum safety and single-cycle mode for continuous production. Through the same panel, users can switch between pressure regulation and stroke regulation, with built-in pressure-holding and time-delay functions. Both working pressure and stroke length can be fine-tuned within the specified range, so the press adapts quickly to different tooling and process requirements without complex setup.

Press Application About Press Machine

Widely used in the following industries

The Y32 four-column hydraulic press is used across a wide range of industrial processes where consistent force and precise control matter. In metalworking shops it handles stamping, deep drawing, riveting, pressing, and straightening of steel and aluminum parts. Plastics manufacturers rely on it for compression molding and the forming of SMC and BMC composite materials. Powder metallurgy producers use the machine to compact metal powders into high-density blanks, while rubber plants apply it for vulcanization and compression molding of seals, gaskets, and technical components.

Automotive suppliers depend on the Y32 for forming structural parts and pressing bearings into housings with repeatable accuracy. In the building-materials sector the press produces refractory bricks and ceramic products that require uniform density and dimensional stability. Across these industries the machine’s rigid four-column frame and adjustable pressure/stroke control deliver the reliability needed for both high-volume production and precision work.

Low energy consumption and high efficiency

The Y27’s open C-frame design gives operators genuine multi-angle access even in confined workshop layouts, so large or irregular parts can be loaded, aligned and unloaded without the restrictions of a closed-frame press. The worktable is fully customizable and available with optional motorized height adjustment, allowing the same machine to handle a wide range of die sizes and production runs without lengthy reconfiguration.

Hydraulic models hold pressure within ±0.5 MPa for consistent force control, while the servo-mechanical versions deliver positioning repeatability down to ±0.01 mm. Servo-driven units also cut energy use by 30–50 % and keep operating noise below 75 dB, making them practical for continuous shifts and quieter factory floors.

Every machine meets ISO 12100 safety requirements and incorporates multi-layer overload protection to safeguard both tools and operators. A modular construction further simplifies long-term ownership, with hydraulic oil change intervals extending up to 2,000 hours.

FAQs When Purchase Y27 Single Movement Hydraulic Press Machine

What is the typical delivery lead time?

Standard models are normally completed and factory-tested within 35–45 working days after order confirmation and technical agreement. Customized configurations (table size, control system or safety options) usually require 50–60 working days.

How long is the warranty and what does it cover?

The complete machine carries a 12-month warranty from the date of accepted delivery; major structural components are covered for 24 months. Free repair or replacement is provided for manufacturing defects. Consumables (seals, filters, hydraulic oil) and damage caused by misuse or improper operation are excluded.

Do you provide overseas installation, commissioning and operator training?

Yes. We can send engineers to the customer’s site for installation guidance, no-load and load testing, plus 2–3 days of operation and routine maintenance training. Training can be conducted in English; travel costs are quoted separately according to location.

How do you match voltage and electrical standards for export markets?

The standard supply is 380 V / 50 Hz three-phase. For North America, Europe or other regions we can convert the machine to 220 V / 60 Hz, 480 V / 60 Hz or any other local grid standard, including matching motors and control components.

What are the foundation requirements for installation?

The press must be placed on a flat, adequately load-bearing concrete foundation. Recommended thickness is 300–400 mm (adjusted by tonnage), with surface levelness within 0.2 mm/m. Detailed foundation drawings and anchor-bolt requirements are supplied before shipment.

Which brand is used for the control system and what languages does the HMI support?

Standard configuration uses Siemens or equivalent PLC. The touch-screen interface is available in Chinese and English; Spanish, Russian, Arabic or other language packages can be added on request.

What is the spare-parts supply lead time and stock situation?

Common wear parts (seals, filters, solenoid valves) are kept in stock and can normally be shipped within 7–10 working days. Critical structural and specialized hydraulic components are typically dispatched within 15–20 working days. A recommended spare-parts list can also be prepared for customers who wish to stock items in advance.

Can the machine be customized to match existing dies or automated production lines?

Yes. We can customize the T-slot layout and locating-pin positions on the table according to the customer’s existing die mounting dimensions. Interfaces for robots or conveyors can be prepared in advance, and we can complete communication protocol integration with the customer’s PLC during commissioning.

How much time does daily maintenance take and what skill level is required?

Daily checks (oil level, leakage, safety devices) take approximately 10–15 minutes. Weekly or monthly routine maintenance (filter change, lubrication) can normally be completed by one trained operator within 1–2 hours. A specialized hydraulic engineer is not required for most routine tasks.

What is the response time for remote support if a fault occurs?

We provide remote video diagnostic support within 8 working hours (in English or Chinese). Most electrical and program issues can be resolved through PLC remote connection or on-site video guidance. If on-site service is required, engineers can normally be arranged within 5–7 working days in Asia; for Europe and North America the schedule depends on visa and flight availability.

Have more questions, or need a customized Hydraulic Press Machine solution?
Contact our team for detailed advice, technical support, or a tailored quotation. We’re ready to help you find the right configuration for your production needs.

Welcome To Contact Us！

Please fill out the form, and we will contact you as soon as possible.

Not familiar with China? Need a reliable team to handle your machinery imports? Looking for a specific sheet metal processing machine? Or searching for a long-term partner in the metal fabrication equipment industry? Tell us what you need, and we’ll make it happen.